www.suzuki-classic.de - Forum und Marktplatz

Where can I buy an adaptor (not made by Suzuki) which may be fitted at the hot oil exit (from the engine to the oil filter)? I need it in order to take the hot oil at its exit (behind the oil filter cap, see SUZUKI Parts catalog GSX750 T/ET and X/EX page 4, the small hole down and left of the oil filter cap just above the bolt 4), drive it to a radiator -oil cooler- to be cool and return it to the oil filter cap room in order it to continue its way to the engine via the oil filter.

hi ?,

unfortunatly i can´t tell you where you can buy an adaptor for the cooler fittings. but i can show you how it works on the 1100 engine, which is of course a little different to the 750.

on the following pictures, you can see an adaptor plate which was sold in the 80´s for the 1100. it´s also possible to modify the filter cap of the 1100 efe engine like this.



this is, how it works on the later build engines:


nice descriptions in detail (1100ccm): http://www.theflyingbanana.com/oil-cooler.htm